SINO-HS SJ-25 LAB MINI EXTRUDER

Product Description

SJ-25 Single Screw Lab Mini Extruder

General Introduction:

SJ-25 LAB MINI EXTRUDER is best choice for extruding termoplastics in laboratory.

This extruder is specially designed with lower power consumption and higher extrusion output.
The Barrel and Screw unit adopts optimized structure. It is easy to meet normal production requirement.

More Technical Details:
8 Directions Adjustment is very convenient for production operation.

Screw and barrel in high-grade nitride steel, screw diameter 25mm，L/D ratio can be 25:1, 28:1, 30:1.

Full steel cover over the extruder barrel with air venting grid on top.

The vented version of our 25mm extruder has been developed with a special screw design, which ensures very good feeding properties without material bleeding out of the vent. the screw designs has been tested and proven with many different polymers such as ldpe, hdpe, pp, ps, abs, nylon, pc and pet.

Screw speed infinite variable from 0 to 300 rpm.

Programmable frequency inverter for infinite variable screw speed and high torque even at low screw speeds. digital readout of the screw rpm and motor power (amp) on the control panel.

2 heating zones on barrel, all with air-cooling. each zone with multiple rows of copper fins for high cooling efficiency, coupled with oversized cooling fans mounted at the rear of the extruder barrel. Large wattage on heaters coupled with the efficient cooling system ensures very fast heating and cooling of each zone.

Digital programmable set and readout temperature controllers for all zones coupled to solid-state relays for accurate heat control.

Modern designed extruder body where all components are fully enclosed.

All electric components and instruments are mounted in the sub body of the extruder.

Convenient control panel mounted below extruder barrel in an upward angle for easy viewing.

OEM & ODM SERVICE AVAILABLE
SINO-HOLYSON, a professional plastic extruder manufacturer, delivers MADE-TO-ORDER service, please send your sample pictures by mail. Our PROPOSALS will be feedback soon by engineer team.
WE TRUST WITH CE & ISO9001 CERTIFICATION, OUR QUALITY MACHINE WILL SATISFY YOU VERY MUCH.

After-sales Service:

We will test the machine in workshop, and invitate you to test againbefore delivery.
We promise our engineer available when the machine arrives to your workshop to help the installation and test.
After installation and test finished, engineer can teaching your workers as your request.
It is our responsibility to help you use the machine smoothly, and produce good quality product.

With us your business in safe, your money in safe.

Outstanding Features:

SJ-25 LAB MiNi EXTRUDER
1) This single screw extruder can be designed with PLC control system.Which will realize full automatic adjustment of the following downstream equipments of the extruder production line.
2) Extruder is Resonable Designed, with a clean operation panel. All the operation button is ENGLISH WRITTEN, Non-Chinese.
3) Maintenance-easily. Our design for this extruder is very convenient for customer to maintaince. It's easy to learn how to operate the extruder.
4) Eco-Friend to the environment. The cooling water from this extruder production line will be recycled.And it has no waste pollutions to our air, water, and land.
Detailed Extruder Display from Different Directions:

Filament Plastic Extruder

Name: PVC ABS PLA SJ-30/28 Single Screw Plastic Extruder

Brand: SINO-HS SJ-25 LAB MINI EXTRUDER + ABB + OMRON

This plastic extruder screw adopts dedicated HIGH-EFFICIENCY Filament Extruder. Installed with a 4kw driving motor, which can meet 10kg max output. The extruder is good choice if using on laboratory filaments.

Mark-Line Used Plastic Extruder:

Name: SJ-25mm Single Screw Plastic Extruder
Brand: SIMENS + OMRON + SCHNEIDER
To close, open circuit loop current under the condition of normal work condtion. The circuit breaker can be used to distribute power, while not to start the asynchronous motor frequently, and to protect the power circuit and motor.

Granules Pelletes Plastic Extruder

Name: SEPERATE SHJ-25 Twin Screw Plastic Extruder
Brand: SIMENS
Compared with the compact design plastic extruder production line,
each unit is seperated installed, so it will be more flexible and convenient for adjustment on both horizontal directions.

Granules Pellets Plastic Extruder

Name: COMPACT SHJ-25 Twin Screw Plastic Extruder
Brand: PLC SINO-HS SJ-25 LAB MINI EXTRUDER CONTROL + OMRON + SCHNEIDER
Original: Germany
This Pellets Extruder Production Line, which is compact designed, is totally suitable for Laboratory

SJ-30 SINGLE SCREW EXTRUDER

91.8% Response Rate

SJ-30 SINGLE SCREW EXTRUDER

91.8% Response Rate

SJZ-21 TWIN SCREW LAB EXTRUDER

91.8% Response Rate

Pre-Sales Service

* Inquiry and consulting support.

* Sample testing support.

* View our Factory.

After-Sales Service

* Training how to instal the machine, training how to use the machine.

* Engineers available to service machinery overseas.

Jinan Joysun Machinery Co., Ltd. is a hi-tech enterprise that is engaged in professional developing,producing and selling on microwave energy applying equipment ,which is one of the biggest scale microwave energy equipment manufacturer SINO-HS SJ-25 LAB MINI EXTRUDER in China since 2009. Jinan Joysun Machinery Co., Ltd. has microwave drying sterilization, microwave thawing, microwave SINO-HS SJ-25 LAB MINI EXTRUDER drying, hot-air drying, combined microwave hot air drying five series of more than 50 products, SINO-HS SJ-25 LAB MINI EXTRUDER has been widely used in food, condiment, agricultural and sideline products, medicine, flowers, wood, building materials, chemical raw materials, ceramics, rubber and other areas.Jinan Joysun Machinery Co., Ltd. has a group of professional sales team, established a perennial cooperative relations with some well-known domestic and foreign universities and enterprises,equipment exported to Europe, South America, Africa, Southeast Asia, the Middle East, Japan, South Korea, more than 30 countries and regions.

consists of a feeding system, an extrusion system, a rotary cutting system, a heating system, a transmission system, and a control system. The use of advanced screw extrusion technology, the use of high temperature and high pressure material curing and expansion molding, one-time completion. The host adopts variable frequency speed regulation to ensure the stability of the production process. Product color, variety, appearance, natural and realistic, delicate texture, raw materials are widely used.