Shandong Leader Machinery Co.,ltd. is a microwave equipment, microwave drying sterilization machine, microwave heating equipment, microwave drying machine, microwave sterilization equipment, microwave drying equipment, whole s microwave curing equipment, microwave drying sterilization condiment, Shandong microwave drying Machine, melon seeds microwave dryer and other products specializing in the production and processing company, has a complete and scientific quality management system. Shandong Leader Machinery Co.,ltd.integrity, strength and quality of products recognized by the industry.
Product Description:
According to customers on the type of oil, daily processing volume, oil standards and other conditions of the requirements of processing customization, size, refining the number of cans, product prices are different.
GSL-Y-006 Model,is the Newest multi-function wire stripping machine
Functions of Wire Stripping Machine
This is the new multinational wire stripping machine, is currently the most advanced, function most cable stripping machine dismantling equipment, processing of cable TV line, the three core and four core cable, cable sheathing, mono-filament wire, multi-strand line and filoselle and a variety of sizes and shapes of cable, the blade cut in insulation, after rolling out, the wire core and the skin will be automatically separated out.
Technical data of Wire Stripping Machine
Model |
Applicable scope (mm) |
Size(cm) |
Output(kg/10h) |
Power(kw) |
Weight(kg) |
GSL-Y-003 |
Φ1.5-Φ38 |
53*52*83 |
100-300 |
1.5 |
60 |
GSL-Y-003-1 |
Φ10-Φ70 |
50*50*100 |
100-500 |
2.2 |
62 |
GSL-Y-004 |
Φ1.5-Φ38 |
54*52*84 |
100-300 |
1.5-2.2 |
81 |
GSL-Y-005 |
Φ1.5-Φ40 |
55*52*84 |
200-1000 |
2.2 |
89 |
GSL-Y-005-1 |
Φ1.5-Φ38 |
63*37*48 |
200-500 |
1.5 |
77 |
GSL-Y-005-2 |
Φ1.5-Φ45 |
54*34*48 |
100-300 |
1.5 |
68 |
GSL-Y-006 |
Φ1-Φ40 |
70*55*84 |
200-1000 |
2.2 |
110 |
GSL-Y-006-1 |
Φ1-Φ55 |
62.5*55*84 |
200-1200 |
2.2 |
106 |
GSL-Y-008 |
Φ1.5-Φ98 |
77*55*118 |
200-3000 |
3 |
210 |
Y-003-1 bigger type |
Φ10-Φ120 |
67*58*110 |
200-1000 |
3 |
110 |
Y-008-1 bigger type |
Φ1.5-Φ120 |
93*55*128 |
200-8000 |
4kw,380v |
260 |
Y-008-3 Special machine |
Φ10-Φ200 |
90*58*135 |
1200-10,000kg |
5.5kw,380v |
300 |
Pictures for Wire Stripping Machine
Maintenance for Wire Stripping Machine
| 1 | Operator must pay special attention to the safety of hands. FATIGUE OPERATION IS FORBIDEN ! |
| 2 | The pressure should not be too tight. Overload work will shorter the life span of the machine. |
| 3 | If the cable cannot get through, operator has to check whether the belt is loose or the pressure is too light, or the blades are wrong directed. |
| 4 | If this machine works with heavy duty for a long time, operator has to check the transmission oil capacity, grease lubrication is required on the four shaft gears before working every three months. |
| 5 | Keep daily maintenance of the four bearing, any damager of bearing will cause shaft broken easily after continuous operating. |
| 6 | When work with bigger size cables, the upper shaft should be kept hanging on the same line by both sides. |
| 7 | Any loosing of the four lifting screw nuts of the transmission and motor have to be adjusted by fastening the chain and V-belt. |
Note: the position of transmission and the motor have to be kept parallel
|
If the copper wire and rubber or plastic cannot be separated completely, please pay attention as below: |
Choose the right feeding hole, adjust the positioning fixture via the diameter of cable |
|
Adjust the gap between the drove-gears according to the diameter of cable. Basically, the gap should be smaller than the diameter of cable. | |
| Keep both sides of the long blades to be symmetrical, as well as the long blades and the position of fixture. |
Contact information of the wire stripping machine
| Company | LD Gashili Machinery Co., Ltd. |
Contact Person |
Nancy |
Website |
https://gashili.en.alibaba.com |
Phone No. |
0086-13643842763 |
Tel No. |
86-371-60317344 |
E-mail address |
nancy(@)gsl-machine.com |
Skype |
gashilinancy |
0086-13643842763 |
Usage of 1-40MM Copper wire stripping machine/ Steel wire straightening and cutting machine
The frame oil filter are mainly used for auxiliary equipment of oil press machine.
Packing & Loading:
1. All machines, which is less than a full container, are packed by the standard wooden case for
exporting. So it is safe and strong enough for a long journey from our factory to your place.
2. If all the machines are shipped by a full container, the container will be loaded in
Shandong Leader Machinery Co.,ltd. by our workers. Also, all the machines will be fixed onto the container.
AAA1
1-40MM Copper wire stripping machine/ Steel wire straightening and cutting machine are a kind of widely used plate and frame type oil filter machine, simple usage,stable performance, and applicable to filter of crude oil and bleached oil.
AAA2
Working principle of 1-40MM Copper wire stripping machine/ Steel wire straightening and cutting machine
1 This frame oil filter is composed of filter plates, filter frames, oil pump and filter cloth,etc.
AAA3
If you have any demand about microwave drying equipment and edible oil refining equipment, pls feel free contact us any time.
LD Miss Candy
Skype: leaderfoodmachine9
Mobile: +86 18363700691 (Also WhatsApp & Wechat)
Email: [email protected]