1tpd-10tpd small oil maker

Shandong Leader Machinery Co.,ltd. is a microwave equipment, microwave drying sterilization machine, microwave heating equipment, microwave drying machine, microwave sterilization equipment, microwave drying equipment, whole s microwave curing equipment, microwave drying sterilization condiment, Shandong microwave drying Machine, melon seeds microwave dryer and other products specializing in the production and processing company, has a complete and scientific quality management system. Shandong Leader Machinery Co.,ltd.integrity, strength and quality of products recognized by the industry.

Product Description:
According to customers on the type of oil, daily processing volume, oil standards and other conditions of the requirements of processing customization, size, refining the number of cans, product prices are different.

1tpd-10tpd small oil maker

small oil maker

1, small oil maker brief introduction

This machine type can press copra, sesame, walnut, sunflower seed, peanut, rapeseed, soybean, and so on.

It has micro electric control, infrared heating, vacuum filter, triple squeezing and multi-stage pressing. The product oil

after filter can be used directly. It is cold and hot amphibious type.

2, small oil maker technical parameters

3, small oil maker spare parts

Worm, squeezing head, worm shaft, cage bar, heater ring, cake outlet, vacuum filter.

4, small oil maker details

1. High oil yielding, low oil residual in the cake:The oil left in cake is less than 6%. The cake

thickness can be adjusted once the machine stops running;

2. Compact size: only 10-20m2 is enough.

3. High purity: machine surface is made of chrome plated stainless steel, in line with food

hygiene standards.

4. Easy operation. You should operate as per the instruction.

5, small oil maker operating principle

1.When oil press is on work, material enters the extruding chamber from the hopper and then

moves forwards by the rotating pressing screw and is pressed.

2.Under high temperature condition in the chamber, there is quite strong friction among press

screw, chamber and the oil materials.

3.On the other hand, root diameter of the pressing screw carries larger from one end to the other.

4.Hence when rotating, the thread not only pushes particles moving forwards but also turns them

outwards as well.

5.Meanwhile, particles adjacent the screw will rotate along with screw’s rotating, causing every

particle inside the chamber to possess different speed.

6.Therefore, relative movement among particles creates neat which is necessary during

manufacturing because of helping protein change property, damage colloid, increase plasticity,

decrease oil’s elasticity, resulting in high oil.

6, small oil maker advantage

1.Saving labor:

It can save 60% labor for equal output and 40% labor cost per day for one or two people are

able to make production.

2.Widely-range:

It can be used to completely press more than 20 kinds of oil crops, such as peanuts, sesame,

vegetable seeds, soybean, oil sunflower and flax by third levels for one time.

3.Pure oil quality:

The bag filter is used to remove residue so as to ensure the pure oil quality and meet the

standard of health quarantine .

4. Using vacuum filter, it is able to simply filter the crude oil after pressing

5. It is able to save labour, about 60%. One or two person is for per machine.

6. Protection the environment, comparing with the traditional oil press machine, it is about

to meet the standard of green environment.

Company Information

Our Strength

1, Established in 1982, we have more than 30 years experience. Our goal is to be pioneer in global and oil

industry.

2, We have deep cooperation with LD Machine Design Research Institute and LD University of

Technology. Our professor often go abroad attending and oil conference and forum.

3, We have completed service line including technical department, engineering department, project department,

electronic commerce department, domestic trade department and foreign trade department. After signing

contract, we will set up special team including engineers, installation technicians, drawing designer,

business person, after-sales service person, and so on. We will provide one-to-one service.

Our Service

• Whole set of equipment for production line.

• Motor and power control system.

• Installation material.

• Installation and test-run.

• Drawing of process description, equipment layout, foundation and

  hole, construction.

• Drawing of power control.

• Isolation and painting for equipment.

• Water recycling and cooling system outside the plant (i.e. supplementary device).

• Staff training and long-term technical service.

Main Business Field

• 10-500T/H oil material primary cleaning,drying and storage section turn-key project.
• 100-3000 T/D oil pretreatment, shelling and pre-press workshop turnkey project (soybean hot dehulling, bean skin crushing, the soybean extrusion, high oil contained pre-pressed cake extrusion and high oil contained flakes puffed directly). Rice bran turn-key project.
• 100-3000 T/D leaching workshop turnkey project (towline extractor, rotocel extractor, loop type extractor,
• LD separated machine, the full negative pressure evaporation,
• Paraffin wax recovery, leaching workshop degumming, phospholipid concentration).
• 30-1000T/D continuous physical (chemical) refining line.
• 20-3000T/D sunflower oil, rice bran oil, corn germ oil dewaxing turnkey project.
• 10-200T/D fatty acid esterification edible oil production line.

Packaging & Shipping

Our Certificates

At present, 1tpd-10tpd small oil maker is the most advanced oil press equipment in oil extracting and processing
machine. Small scale oil extraction machine is through forced feed by a screw shaft which
produce high temperature and pressure under the rotation and squeeze between screw shaft and
pressing ring. It is a extracting oil technique that make materials from crush and squeeze to
oil and cake, which belongs to physical press.

AAA1
Introduction of 1tpd-10tpd small oil maker
1)Palm oil mill have main ten parts: Reception Station,Sterilizer,Threshing,Press,Clarification,
Kernel Recover, power station, boiler station, water treatment plant, oil storage tank.
2)1tpd-10tpd small oil maker use the Fresh Fruit Bunch, because the palm fruit rancidity is very fast, if the
rancidity will be influence the palm crude oil acid value, if the acid value is very high, the
refining efficiency will drop.
3)Generally speaking, the palm oil mill be mainly located in Nigeria,Malaysia,Indonesia etc..
AAA2

If you have any demand about microwave drying equipment and edible oil refining equipment, pls feel free contact us any time.

LD Miss Candy
Skype: leaderfoodmachine9
Mobile: +86 18363700691 (Also WhatsApp & Wechat)
Email: [email protected]