small cheap cooking oil extraction factory machine price

Shandong Leader Machinery Co.,ltd. have engaged in Oil Refinery Equipment and Microwave Equipment since1997 in China,with 20 years` experience and 80 engineers,, scientific research, manufacturing, installation, commissioning.We can provide customers with design and services of 1-2000 tons oil equipment.factory occupied area is over 100,000 square meters,more than 3200 customers all around the world, we greatly hope to have the opportunity to serve you.

Product Description:
According to customers on the type of oil, daily processing volume, oil standards and other conditions of the requirements of processing customization, size, refining the number of cans, product prices are different.

small cheap cooking oil extraction factory machine price

We provide all machines necessary for a complete soya flakes making plant.

Solvent extraction

Oils and fats in soybean flakes can dissolve in certain solvent. Therefore, we can immerse pressed fakes in solvent to extract oils and fats. Then remove solvent from wet meal, strip solvent from miscella, and recycle solvent.

Extraction

We’ve percolation extractor, immersion extractor and rotocel extractor, etc., as shown below. The solvent pumps in extractor will continuously spray solvent and soak the soybean flakes in it, so that oils and fats can be dissolved. After that, you get wet meal and miscella (mixed oil and solvent).

Wet meal treatment

Desolventizer toaster with integrated dryer-cooler(LD) is a system for separating solvent from the wet meal. We've vertical desolventizer toaster, horizontal desolventizer, flash desolventizing system and low temperature desolventizer, etc., as shown below.

Miscella treatment

After extraction, filter the miscella, send it to two evaporators successively, and then to the stripping tower. We’ve raising film evaporator, vapor separator, negative evaporator, normal evaporator, etc. For stripping, we’ve tubular stripping column, disk stripping column, plate stripping tower, filling steam stripping tower, etc. After evaporation and stripping, you get crude rice bran oil and desolventized meal. This meal can be used to produce feeds. The crude oil needs to be refined.

Solvent recovery

The solvent vapour from wet meal and miscella will be collected by condensers to be reused. We’ve pipe bundle condenser, spraying condenser, contact condenser, etc., as shown below.

Extraction parameters

Capacity:300T/D

Residual percent in the cake: less than 1%

Solvent consumption: less than 2kg per ton needed for each raw material

Moisture and volatile in the crude oil: less than 0.3%

Electricity consumption: less than 15 kw.h consumed for each ton raw material.

Steam consumption: less than 280kg steam consumed for each ton raw material, if the pressure is 0.8Mpa.

The moisture of finished cake: less than 13%, it can be adjusted according to your needs.

The residual solvent in the finished cake: less than 300PPM, which is qualified by the experiment.

Features of our desolventizer

1)It can raise the using value of the cake by passivating and destroying the anti-nutrition elements such as urease and trypsin in the cake.

2)It can well control the degeneration degree of the protein in the cake, and can effectively raise the NSI index.

3)It can well adjust the color, the smell and the granule size of the cake.

4)It can better reduce the reside solvent in the cake, and can adjust the moisture in the cake, which can ensure the safe use of the cake and the least consumption of the solvent during the producing.

The features of our negative evaporation

1)High efficiency, thorough desolventizing, low consumption of solvent in the crude oil.

2)The reside steam in the steam jet pump and the used steam of the desolventizer can be use as the heat source of the first steam, which can save energy,at the same time,it can reduce the land square needed for the condenser, then save money.

3)Because of the lower temperature needed for stripping, the crude oil is clearer, better quality, less reside solvent.

Solvent Extractor Advantages

1) The material is divided into several independent units on the material bed, which can effectively prevent miscella at all levels from fleeing hither and thither on the material layer and ensure the concentration gradient between several sprays.

2) Immersion area appears in each lattice, which can help achieve better immersion effect.

3) The chain box is supported by track and can prolong the service life of screen deck by not touching it.

4) The towline extractor is driven by world leading double-shaft hydraulic motor, with balance force, reliable operation and less maintenance cost.

Whole set of equipment for palm oil production line.

Motor and power control system.

Installation material.

Installation and test-run.

Drawing of process description, equipment layout, foundation and construction.

Drawing of power control.

Isolation and painting of equipment.

Water recycling and cooling system outside the plant (i.e. supplementary device).

Staff training and long-term technical service.

Main business field

10-500T/H oil material primary cleaning,drying and storage section turn-key project.

100-3000 T/D oil pretreatment, shelling and pre-press workshop turnkey project (soybean hot dehulling, bean skin crushing, the soybean extrusion, high oil contained pre-pressed cake extrusion and high oil contained flakes puffed directly). Rice bran turn-key project.

100-3000 T/D leaching workshop turnkey project (towline extractor, rotocel extractor, loop type extractor,

LD separated machine, the full negative pressure evaporation,

Paraffin wax recovery, leaching workshop degumming, phospholipid concentration).

30-1000T/D continuous physical (chemical) refining line.

20-3000T/D sunflower oil, rice bran oil, corn germ oil dewaxing turnkey project.

10-200T/D fatty acid esterification edible oil production line.

Introduction of small cheap cooking oil extraction factory machine price:
Integrated oil press is an advanced screw oil expeller. This kind of automatic combined oil press machine is very popular in edible oil making market nowadays. Different with traditional oil press, the integrated oil press can save labor power and simplify the oil making process.

AAA1

Main Structure of small cheap cooking oil extraction factory machine price:
This combined oil expeller is composed by four parts: feeder, press chamber, electrical control panel
and vacuum filter drum. The heating system is inside the press cage. The filtering drum is vacuum
filter with sight glass.
The oil sight glass can help user to control the speed of oil clearing process. Integrated oil press
machine is an ideal choice for those who do business in the country market or who
run a small or medium oil mill in city.

AAA2

If you have any demand about microwave drying equipment and edible oil refining equipment, pls feel free contact us any time.

LD Miss Candy
Skype: leaderfoodmachine9
Mobile: +86 18363700691 (Also WhatsApp & Wechat)
Email: [email protected]