Shandong Leader Machinery Co.,ltd. have engaged in Oil Refinery Equipment and Microwave Equipment since1997 in China,with 20 years` experience and 80 engineers,, scientific research, manufacturing, installation, commissioning.We can provide customers with design and services of 1-2000 tons oil equipment.factory occupied area is over 100,000 square meters,more than 3200 customers all around the world, we greatly hope to have the opportunity to serve you.
Product Description:
According to customers on the type of oil, daily processing volume, oil standards and other conditions of the requirements of processing customization, size, refining the number of cans, product prices are different.
Fully automatic flexseed oil press machine
Flowchart of flexseed oil press machine:
Metering âCleaning âMagnetic separationâDestonerâCrushing âSoftening âFlaking
âCooking âPre-pressing âgo to extraction section
â
Second oil press
Pretreatment process flexseed oil press machine:
a. Cleaning device: To remove various impurities in oilseeds, such as: iron, stones, clump,
such as the plant leaf, clean up till impurity content does not exceed 0.2%.
b. Crushing machine: Oilseeds are crushed into 6-8 pieces. In order to meet the
requirements of crushing, the peanut is suitable for crushing with the moisture of 7% to 12%.
c. Softening Process: The purpose of softening is to adjust the moisture and temperature
of oil, and make it soft.
d. Flaking process: Rolling raw material into flakes, and the purpose is to increae surface
area, destroy the peanut cell tissue, shorten the way of oil out from cake.
e: Cooking process: Use steam cooking, inject direct steam and cook the flakes to meet
the requirement of oil press.
f. Prepress: Press the flakes to leave about 16%-18% in the cake. The cake will go to
extraction process.
g. Second oil press: Press the cake till the oil residue is about 5%.
Consumption in Operation of flexseed oil press machine:
Residual oil in cake |
â¤5% (SUNFLOWER ) |
Handling capacity |
500kg-50tons/h |
Crude oil moisture and volatile matter |
⤠0.30% |
Power consumption |
⤠15KWh/T |
Steam consumption |
â¤120Kg/T (0.8MPa) |
Mechnical impurities |
⤠0.3% (adjustable) |
Moisture in crude oil |
⤠0.2% (qualified detonated experiment |
Main parts of flexseed oil press machine:
Extraction process of flexseed oil press machine:
1. Introduction
(1) Function: Edible oil extraction machine is an oil extractor through soaking or spraying
prepressed cake by a certain organic solvent. The principle of this part is the different
solubility of solvent.
(2) Use range: Edible oil solvent extraction fits for pre-press extraction of high oil- content materials and direct once time extraction of low-oil-content materials.
(3) Main parts: The edible oil extraction making series includes rotary extractor, toaster,
1st evaporator, 2nd evaporator, stripping tower, condenser, etc.
2. Main parts function
(1) Solvent pumps: continuously spray solvent to the rotary-typr extractor.
(2) Roary extractor: spray and soak the pre-pressed cake with solvent so that oil fats can be dissolved in solvent (form miscella).
After processing, you can get wet meal and miscella (mixed oil).
(3) LD: used to separate the solvent from the wet meal.
(4) Miscella tank 1st: pump the miscella ( oil with solvent) into the miscella 1st, then
add 10% saline water to it. The phospholipid and impurities in the miscella will react with
the saline water, at last the reactant precipitate, reaching the goal of purifying.
(5) Miscella tank 2nd: the purified miscella will be pumped into it.
(6) Miscella stripping: it will remove the remaining solvent in miscella. And the solvent will
be discharged to condenser for recycling.
(7) Condensers: used to cooling the solvent gas separated from the wet meal and miscella
for recycling.
3. Main Process
(1) The material (for pretreatment) is sent to rotary extraction by the scraper conveyor. The
material will extracted by the solvent or mix oil. After this step, we will get meal and mix oil.
(2) Meal is send to toaster. Through the toaster, the solvent in the meal will seperate from
the meal.The solvent goes to condenser and is recycled to rotary extraction.
(3) After the mix oil from the rotary extraction enters into 1st evaporator and 2nd evaporator,
most of the solvent in the mix oil is separated.
(4) The mix oil from 2nd evaporator goes to stripping tower and almost all the solvent is
separated. From the stripping tower, we can get crude oil and solvent. The solvent is sent to
condenser and is recycled to rotary extraction.
4. Advantages
(1) High oil yield, obvious economic benefit
(2) Less residual oil rate in the dry meal.
(3) Improving the quality of the meal.
(4) Low processing cost, high labor productivity.
If you are interested in our flex oil expeller, please contact me directly or send me inquiry details in the blow, and click "Send", i will reply you in the fastest speed.
Shandong Leader Machinery Co.,ltd. are one of the leading Manufacturers and Suppliers of Fully automatic flexseed oil press machine . Shandong Leader Machinery Co.,ltd.manufacture oil expeller machine using cutting-edge technology and high grade parts and components like electric gas, hydraulic valve, etc., that are procured from famous brand manufacturers. The electric cabinet housed in the oil expeller machine automatically controls the production.
AAA1
1. Hydraulic Pump
fully automatic flexseed oil press machine of this oil expeller machine is the main power force of this machine
it includes transmission shaft, turbine, worm gear, gear pump, high pressure pump, overflow valve; super high pressure safety valve; hand-operated valve; seamless steel tube; pipeline connect and other spare parts.
AAA2
2. Electric System
Electronic system of this oil expeller machine is the most advanced part of this machine, it is fully automatic, easy to operate, and there’s no special request to the operator, so this machine is particularly suitable for household and workshop.
3. Stainless Oil Drum
The oil material is put into the assembly of the press boring ,then it being droved up by the oil cylinder piston ,oil will outflow from the gap of press boring ,and then pass the oil drip pan to the drum for oil storage.
AAA3
If you have any demand about microwave drying equipment and edible oil refining equipment, pls feel free contact us any time.
LD Miss Candy
Skype: leaderfoodmachine9
Mobile: +86 18363700691 (Also WhatsApp & Wechat)
Email: [email protected]