Shandong Leader Machinery Co.,ltd. have engaged in Oil Refinery Equipment and Microwave Equipment since1997 in China,with 20 years` experience and 80 engineers,, scientific research, manufacturing, installation, commissioning.We can provide customers with design and services of 1-2000 tons oil equipment.factory occupied area is over 100,000 square meters,more than 3200 customers all around the world, we greatly hope to have the opportunity to serve you.
Shandong Leader Machinery Co.,ltd. has finished hundreds of successful projects over the years: peanut oil, soybean oil, rapeseed oil, cottonseed oil, sunflower oil, sesame oil, animal oil,grape seed oil, acer truncatum oil, peony seed oil, walnut oil, hemp seed oil, pine oil, tea seed oil, papaya oil, milk thistle seed, and other special type oil.We have independent import and export department. Our equipment has been successfully exported to more than 100 countries: Russia, Australia, India, Afghanistan, Cameroon,and so on.
Automatic peanut edible oil refining equipment made in China
Automatic peanut oil refining equipment
Automatic control System
Our company has applied the automatic control system with advancedness, security, reliability into the pretreatment, etraction, refining and fractionation in large oil plants. For its application in automatic control system, it can control the production in the entire workshop and monitor the operational status of each device by controlling the computer terminals in the room. One person only can operate the entire workshop, with efficient production management. It has reduced the production cost greatly and improved the management efficiency.
Automatic peanut oil refining equipment Introduction:
Alkali hot water
Crude oil filter reactor reactor centrifugal separationoil residue
Phosphoric acid hot water
Degumming oil cooler dry centrifuge separation alkali liquor
vacuum steam jet pumpsteam citric acid
bleaching earth decoloring filter decoloring oil heat
refined oilfiltercooLDodorizingvacuum
Automatic peanut oil refining equipment -Main Processes Introduction
Automatic peanut oil refining equipment
Neutralization: the crude oil is output by the oil feed pump from the oil tank, and net enters the crude oil heat echanger to recover part of heat after metering and then is heated to the required temperature by the heater. After that, the oil is mied with the metered phosphoric acid or citric acid from phosphate tank in the gas miture (M401), and then enters the conditioning tank (R401) to make the non-hydratable phospholipids in oil change into the hydratable phospholipids. Add the alkali for neutralization, and the alkali quantity and alkali solution concentration depend on the quality of the crude oil. Through the heater, the neutralized oil is heated to the temperature (90C) suitable for centrifugal separation to remove the phospholipids, FFA and other impurities in the crude oil. Then the oil goes to the washing process.
Washing: there is still about 500ppm soap in the neutralized oil from the separator. To remove the remaining soap, add into the oil about 5~8% hot water, with water temperature 3~5 C higher than the oil generally. To achieve more stable washing effect, add phosphoric acid or citric acid when washing. The re-mied oil and water in the mier is heated to 90-95C by the heater, and then enters the wash separator to separate the remaining soap and most water. The water with soap and oil enters into oil separator to separate out oil in the water. Further catch the oil outside, and the waste water is discharged to the sewage treatment station.
Vacuum drying stage: there is still moisture in the oil from the wash separator, and the moisture will affect the stability of the oil. So the oil at 90C should be sent to vacuum drier to remove the moisture, and then the dehydrated oil goes to the decoloring process. Finally, pump out the dry oil by canned pump.
Decoloring Process:
The main function of decoloring process is to remove oil pigment, residual soap and metal ions. Under negative pressure, the mechanical miing method combined with steam miing will improve the decoloring effect.
Picture of Automatic peanut oil refining equipment
If you have interest in our Automatic peanut oil refining equipment,just free to contact us.
In order to obtain high effective cleaning, ensure good work condition and production stability, high efficient
vibration screen was used in the process to separate big and small impurity.
Suction type gravity stoner removing machine was applied to remove the shouLDr stone and earth, and
magnetic separation equipment without power and exhaust system were used to remove iron.
Dust removing wind net is installed. soybean oil machine
AAA1
Automatic peanut edible oil refining equipment made in China is a crushing machine equipment that use the double tooth roller for granular material on two consecutive crushing processing,in order to meet the requirement of process.This Automatic peanut edible oil refining equipment made in China - Crusher Machine is suitable for the crushing processing of soybeans,peanuts and soybean meals and etc.
AAA2
If you have any demand about microwave drying equipment and edible oil refining equipment, pls feel free contact us any time.
LD Miss Candy
Skype: leaderfoodmachine9
Mobile: +86 18363700691 (Also WhatsApp & Wechat)
Email: [email protected]