palm oil refinery plant equipment for cooking oil are edible oil press machine, Sunflower Seed Oil Plant Equipment and edible oil refining machine. It's applicable to peanut oil press, soybean oil press, palm kernel oil press, sesame oil press, rice bran oil press, rapeseed oil press, cottonseed oil press, sesame oil press, copra oil press, castor oil press,sunflower oil press,pumkin seed oil press,corn germ oil press,bancoul oil press, walnut oil press, mustard seed oil press, avocado oil press, shea butter press, pine nut oil press, grape seed oil press,almond oil press,tea seed oil press, pepper seed oil press, cocoa butter press,etc.
Shandong Leader Machinery Co.,ltd. can supply oil press machine for 1 ton to 2000tons per day.
Specifications
Palm Oil refinery equipment:1.bleaching earth automatic metering
2.negative pressure decoloring
3.continuous deodorization
Palm Oil Refinery Rquipment
Basing on the traditional oil refining technology, LD and Oil Machinery Co.,Ltd has developed the latest combined packing layer plate deodorization soft tower and the physical and chemical mixed refining technology for crude oil of any quality. Moreover, a series of advanced technology and equipment are used, such as super wet deguming, bleaching earth automatic metering, negative pressure decoloring, high vacuum steam jet deodorization, deacidification, winterization dewaxing etc.. With advanced technology, superior equipment, full-Automatic control and excellent economic and technical parameters, our equipment can meet customers' different refinery equipments at home and abroad.
Main Processes Introduction
Hydration Deguming & Alkali Refining Deacidification Process
Neutralization: the crude oil is output by the oil feed pump from the oil tank, and next enters the crude oil heat exchanger to recover part of heat after metering and then is heated to the required temperature by the heater. After that, the oil is mixed with the metered phosphoric acid or citric acid from phosphate tank in the gas mixture (M401), and then enters the conditioning tank (R401) to make the non-hydratable phospholipids in oil change into the hydratable phospholipids. Add the alkali for neutralization, and the alkali quantity and alkali solution concentration depend on the quality of the crude oil. Through the heater, the neutralized oil is heated to the temperature (90°C) suitable for centrifugal separation to remove the phospholipids, FFA and other impurities in the crude oil. Then the oil goes to the washing process.
Vacuum drying stage: there is still moisture in the oil from the wash separator, and the moisture will affect the stability of the oil. So the oil at 90°C should be sent to vacuum drier to remove the moisture, and then the dehydrated oil goes to the decoloring process. Finally, pump out the dry oil by canned pump.
Continuous Refining Decoloring Process
The main function of decoloring process is to remove oil pigment, residual soap and metal ions. Under negative pressure, the mechanical mixing method combined with steam mixing will improve the decoloring effect.
The degummed oil firstly enters into the heater to be heated to the appropriate temperature (110°C), and then goes to the bleaching earth mixing tank. The bleaching earth is delivered from the low bleaching box to the temporary tank by wind. The bleaching earth is added by automatic metering and is interlockingly controlled with the oil.
The oil mixed with the bleaching earth overflows into the continuous decolorizer, which is stirred by non-powered steam. The decolored oil enters into the two alternate leaf filters to be filtered. Then the filtered oil enters the decolored oil storage tank through the security filter. The decolored oil storage tank is designed as the vacuum tank with the nozzle inside, so as to prevent the decolored oil contacting with the air and influencing its peroxide value and color reversion.
Continuous Decoloring Process Features:
1. The oil fully contacting with the decolorant can improve the decolorization efficiency and reduce the usage of decolorant;
2. The continuous and uniform material flows will balance the decoloring time and avoid the recovery of grease oxidation and acid value.
3. The special mixing structure of decoloring tower won't cause the material dead area, which can avoid the adsorbent sedimentation and pipe blockage.
4. The continuous airtight efficient filtration equipment has realized the automation of cake discharge and reduced the labor intensity.
5. The advanced drying technology can reduce the oil content in filter cake.
Continuous Refining Deodorizing Process
The qualified decolored oil enters into the spiral plate heat exchanger to recover most of the heat, and next goes to high pressure steam heat exchanger to be heated to the process temperature (240-260°C) and then enters the deodorization tower. The upper layer of combined deodorization tower is the packing structure which is mainly used to remove the odor producing components such as free fatty acid (FFA); the bottom layer is the plate tower which is mainly for achieving the hot decoloring effect and reducing the peroxide value of the oil to zero. Oil from the deodorization tower enters into the heat exchanger to recover most of the heat and makes further heat exchange with crude oil, and then is cooled to 80-85°C through the cooler. Add the required antioxidant and flavor agent, and then cool the oil below 50°C and store it. Such volatiles as FFA from the deodorizing system are separated by the packing catcher, and the separated liquid is FFA at low temperature (60-75°C). When the liquid level in the temporary tank is too high, the oil will be sent to the FFA storage tank.
Automatic Control System
Our company has applied the automatic control system with advancedness, security, reliability into the pretreatment, extraction, refining and fractionation in large oil plants. For its application in automatic control system, it can control the production in the entire workshop and monitor the operational status of each device by controlling the computer terminals in the room. One person only can operate the entire workshop, with efficient production management. It has reduced the production cost greatly and improved the management efficiency.
Instruction of palm oil refinery plant equipment for cooking oil
1. A wide range of application. oil press machine can press more than 20 kinds of oil plant seeds, such as soybean, peanut, sesame, rapeseed, sunflower, olive, palm, coconut and flax seed,etc.
2. High oil yield and purer oil. The equipped vacuum filter is used to remove residue to ensure the pure oil quality and meet the standards of health quarantine.
3. Labor and electricity saving. palm oil refinery plant equipment for cooking oil can saves 70% labor for equal output, and one or two people are able to operate independently.
AAA1
4. Covering little space. An area of 2-4m*m workshop is enough, thus oil press machine is suitable for small and medium size oil extruding workshops or professional oil mills.
Functions of palm oil refinery plant equipment for cooking oil
1.Oil press has multiple functions, including vacuum filtration system, automatic heatingdevice .Before pressing, some parts of the oil press such as the press chamber,press screw will be pre-heated.
AAA2
2.palm oil refinery plant equipment for cooking oil is matched with one controlling cabinet box for controlling all working of the machine.
3. Labour saving and electricity saving, high oil yield and nice performance.
4.Wide application Such oil press can apply to more than 20 kinds of oil crops such as the coconuts,sunflower, soybean,cotton seeds , tee seeds, rice bran, flaxseeds,sesame, peanuts, rape, cocoa and grass seeds, corn pummels etc.
AAA3
If you have any demand about microwave drying equipment and edible oil refining equipment, pls feel free contact us any time.
LD Miss Candy
Skype: leaderfoodmachine9
Mobile: +86 18363700691 (Also WhatsApp & Wechat)
Email: [email protected]