LDâÃÂÃÂE refining of crude palm kernel oil equipment
refining of crude palm kernel oi
Main parts of refining of crude palm kernel oil
1. The neutralizing tank : it is used to reduce the acid value to the point.
2. The decoloring tank: it is to bleach the oil
3. The deodorizing tank: it is used to remove the odor in the oil
4. The conducting oil furnace: it is to provide the heating for production
5. The vacuum pump: it is to provide vacuum for bleaching , deodorization which
can reach 755mmkg
6. The air compressor: it is to dry the bleached clay
7. The air press: it is to filter clay
8. The stream generator: it is to generate stream distillation
Technical parameters of refining of crude palm kernel oil
capacity |
1-1000T/D |
Steam consumption |
700Kg/T |
Electricity consumption |
28Kwh/T |
Soft water |
150Kg/T |
Phosphoric acid |
2-3Kg/T |
Alkali |
Acid value*1-3Kg/T |
Circulating cooling water |
150mÃÂó/H |
Carclazyte |
3-5Kg/T |
Oil yield of waste carclazyte |
25-35% |
Loss in refinery
|
Acid value*1.2(chemical) |
Acid value*0.6(physical) | |
Loss in decolorization |
Carlazyte quantity*0.25% |
Loss in deodorization |
âÃÂä0.5% |
equipment parts
Equipement parts of refining of crude palm kernel oil
raw material
The raw oil material of refining of crude palm kernel oil
end products
The end products of refining of crude palm kernel oil
Packaging & Shipping
The shipping of refining of crude palm kernel oil
Our Services
Our service of refining of crude palm kernel oil
1. Arrange our people to help with the installation, debugging, training.
2. We will maintain or change the machine free charge, if there is any quality problems, we will bear all the fees.
3. We will supply you with the abrased spare parts at cost price after been used one more year, we will maintain it free charge if technical damage happens.
Company Information1. Our factory and cooperated university
LD &Oil Machinery Co.,Ltd is a large-sized joint-equity enterprise which specialize in producing edible oil mechanical equipment and it is also a group enterprise integrating scientific research, manufacturing, sales as one. Research Institute of Machine Design Company and LD, LD University of Technology (formerly the LD College) school-enterprise cooperation in the oil equipment to carry out long-term, protein extraction, phospholipid extraction, etc. R & D and application of new technologies.
Our company have set up Mechanical Design and Research institution,oil press machine department ,large-sized complete oil equipment department,International trade department,production department.Our business involve in small-sized oil pressing series, and oil engineering designing,equipment manufacturing and installing, project contracting,technical service ,new product development,the intensive and deep processing for oil by-products and so on.
2. Our installation team,research and technical team.
3. Our office building and our company spirit
contact us
For further questions, please contadt us by using the contacts below.
Thank you!!!
Attn: Sophia
Add:The crossing of Huagong Road and Changchun Road in High Technical Development Area, LD, P.R.China
Website: www.LDmach.com
Phone: 18749550927
Skype:sophia.xu.first
Whatsapp/viber/tango: +8618749550927
Oil refining means separating impurity from oil based on the different characteristics of oil and impurity, in order to enhance the stability and security of oil. Oil refining including two technologies, physical refining and chemical refining.echnological process details of LD refining of crude palm kernel oil equipment:
AAA1
1. Acid reaction process
Oil temperature can be adjusted by screw plate heat exchanger. When the temperature is heated to about 80℃, mixing about 85% food grade phosphoric acid into acid reaction tank for reacting. In the tank, most non-hydrated phospholipid transfer into hydrated phospholipid.
AAA1
2. Neutralization process
In the neutral section, degummed oil with appropriate temperature and the appropriate concentration of alkali liquor, into the neutralization centrifugal mixer mixing, in order to achieve the effect of mixed, the mixture is then sent to neutralization tank for enough time, in this process, excessive alkali neutralization of free fatty acids and some phosphate form soapstock , after pumping oil soap mixture into heater oil heating to 85 ~ 90 ℃ in centrifuge separation oil - soap (or oil - glue). Oil soapstock of the separated (or foot) feet into the oil tank, and then to the salting out with soap pump tank isolated part of the oil.
AAA2
3. Washing process
Neutral oil from separator, still contains about 500 ppm soap, in order to reduce the residual content of soap, oil is joined by about 10% of hot water, washed in the washing mixer, hot water will absorb oil soap and other impurities, then in the water separator are separated.
AAA3
If you have any demand about microwave drying equipment and edible oil refining equipment, pls feel free contact us any time.
LD Miss Candy
Skype: leaderfoodmachine9
Mobile: +86 18363700691 (Also WhatsApp & Wechat)
Email: [email protected]
Shandong Leader Machinery Co.,ltd. is a microwave equipment, microwave drying sterilization machine, microwave heating equipment, microwave drying machine, microwave sterilization equipment, microwave drying equipment, whole s microwave curing equipment, microwave drying sterilization condiment, Shandong microwave drying Machine, melon seeds microwave dryer and other products specializing in the production and processing company, has a complete and scientific quality management system. Shandong Leader Machinery Co.,ltd.integrity, strength and quality of products recognized by the industry.
Why do you choose the Shandong Leader Machinery Co.,ltd. LD refining of crude palm kernel oil equipment?
1.Healthy! Pure mechanical squeezing craft maximally keeps the nutrients of the oil plants.No chemical substances left
2. High working efficiency! Due to a high working efficiency of the screw oil press machinery,both time and power can be saved.
3. Long durability! All the parts are made of the most suitable material and treated with refined crafts, such as cemented quenching and tempering to increase the hardness, consequently the durability.
4. LD refining of crude palm kernel oil equipmentCost-effective! Low investment! The wearing parts on the oil press machinery such as the squeeze loop, squeeze spiral and squeeze bar are designed to be dismountable. When they are out of service period, users only need to replace them and there is no need to displace the whole machine.