1TPD-10TPD castor oil cold pressed
castor oil cold pressed
Product Description
1, castor oil cold pressed brief introduction
6YY-230 oil cold press machine can press sesame, copra, peanut, rapeseed, soybean, walnut,
almong, and so on. It uses high quality metal material such as 45# steel and 27SiMn steel forgings.
With lower power consumption and noise, it can be fed with 7-8Kg of material every time
and complete squeeze in 6-8 min. the equipment may squeeze at any time easily and make edible oil
for users at ease.
2, castor oil cold pressed technical parameters
Professional sesame oil cold press machine
Model | Type | Production condition | Capacity | Dimension(mm) |
6YY-230 | Vertical hydraulic | One staff, 10m2 plant | 35-55kg/h | 900*850*1550 |
6YY-260 | Vertical hydraulic | One staff, 10m2 plant | 45-70kg/h | 1050*950*1650 |
6YY-360 | Horizontal hydraulic | One staff, 30m2 plant | 80-120kg/h | 2800*800*1500 |
6YY-460 | Vertical hydraulic | One staff, 30m2 plant | 60-110kg/h | 1000*1300*1950 |
3, castor oil cold pressed advantage
Inside this professional sesame oil cold press machine, the main hydraulic driving parts are made up
of driving worm, turbine, bent axle, high-pressure pump, gear pump, one-way valve,
hydraulic cylinder, hydraulic tube, and so on. Combining domestic and overseas advanced
technology, we have designed hydraulic triple plunger pump station. It has high, stable
pressure and can produce more oil.
np
don
Company InformationCompany Information
Our Strength
1, Established in 1982, we have more than 30 years experience. Our goal is to be pioneer in global and oil
industry.
2, We have deep cooperation with LD Machine Design Research Institute and LD University of
Technology. Our professor often go abroad attending and oil conference and forum.
3, We have completed service line including technical department, engineering department, project department,
electronic commerce department, domestic trade department and foreign trade department. After signing
contract, we will set up special team including engineers, installation technicians, drawing designer,
business person, after-sales service person, and so on. We will provide one-to-one service.
Our Service
Whole set of equipment for production line.
Motor and power control system.
Installation material.
Installation and test-run.
-
Drawing of process description, equipment layout, foundation and
hole, construction.
Drawing of power control.
Isolation and painting for equipment.
Water recycling and cooling system outside the plant (i.e. supplementary device).
Staff training and long-term technical service.
Main Business Field
- 10-500T/H oil material primary cleaning,drying and storage section turn-key project.
- 100-3000 T/D oil pretreatment, shelling and pre-press workshop turnkey project (soybean hot dehulling, bean skin crushing, the soybean extrusion, high oil contained pre-pressed cake extrusion and high oil contained flakes puffed directly). Rice bran turn-key project.
- 100-3000 T/D leaching workshop turnkey project (towline extractor, rotocel extractor, loop type extractor,
- LD separated machine, the full negative pressure evaporation,
- Paraffin wax recovery, leaching workshop degumming, phospholipid concentration).
- 30-1000T/D continuous physical (chemical) refining line.
- 20-3000T/D sunflower oil, rice bran oil, corn germ oil dewaxing turnkey project.
- 10-200T/D fatty acid esterification edible oil production line.
Packaging & Shipping
Certificates
Our Certificates
Contact Information
Oil refining means separating impurity from oil based on the different characteristics of oil and impurity, in order to enhance the stability and security of oil. Oil refining including two technologies, physical refining and chemical refining.echnological process details of 1TPD-10TPD castor oil cold pressed:
AAA1
1. Acid reaction process
Oil temperature can be adjusted by screw plate heat exchanger. When the temperature is heated to about 80℃, mixing about 85% food grade phosphoric acid into acid reaction tank for reacting. In the tank, most non-hydrated phospholipid transfer into hydrated phospholipid.
AAA1
2. Neutralization process
In the neutral section, degummed oil with appropriate temperature and the appropriate concentration of alkali liquor, into the neutralization centrifugal mixer mixing, in order to achieve the effect of mixed, the mixture is then sent to neutralization tank for enough time, in this process, excessive alkali neutralization of free fatty acids and some phosphate form soapstock , after pumping oil soap mixture into heater oil heating to 85 ~ 90 ℃ in centrifuge separation oil - soap (or oil - glue). Oil soapstock of the separated (or foot) feet into the oil tank, and then to the salting out with soap pump tank isolated part of the oil.
AAA2
3. Washing process
Neutral oil from separator, still contains about 500 ppm soap, in order to reduce the residual content of soap, oil is joined by about 10% of hot water, washed in the washing mixer, hot water will absorb oil soap and other impurities, then in the water separator are separated.
AAA3
If you have any demand about microwave drying equipment and edible oil refining equipment, pls feel free contact us any time.
LD Miss Candy
Skype: leaderfoodmachine9
Mobile: +86 18363700691 (Also WhatsApp & Wechat)
Email: [email protected]
Shandong Leader Machinery Co.,ltd. is a microwave equipment, microwave drying sterilization machine, microwave heating equipment, microwave drying machine, microwave sterilization equipment, microwave drying equipment, whole s microwave curing equipment, microwave drying sterilization condiment, Shandong microwave drying Machine, melon seeds microwave dryer and other products specializing in the production and processing company, has a complete and scientific quality management system. Shandong Leader Machinery Co.,ltd.integrity, strength and quality of products recognized by the industry.
Why do you choose the Shandong Leader Machinery Co.,ltd. 1TPD-10TPD castor oil cold pressed?
1.Healthy! Pure mechanical squeezing craft maximally keeps the nutrients of the oil plants.No chemical substances left
2. High working efficiency! Due to a high working efficiency of the screw oil press machinery,both time and power can be saved.
3. Long durability! All the parts are made of the most suitable material and treated with refined crafts, such as cemented quenching and tempering to increase the hardness, consequently the durability.
4. 1TPD-10TPD castor oil cold pressedCost-effective! Low investment! The wearing parts on the oil press machinery such as the squeeze loop, squeeze spiral and squeeze bar are designed to be dismountable. When they are out of service period, users only need to replace them and there is no need to displace the whole machine.