Cooking palm oil refining machine/Soybean Oil Processing Plant sunflower Oil Processing Plant full

Cooking palm oil refining machine/Soybean Oil Processing Plant sunflower Oil Processing Plant full main performance characteristics
When picking fresh leaves without traditional filming for the pre cooling can be directly into the microwave drying equipment.When Cooking palm oil refining machine/Soybean Oil Processing Plant sunflower Oil Processing Plant full and the new technology of tea processing his time than traditional production shorten the above four small, use labor per shift just 2 people, improve labor efficiency is 400%, and greatly reduce the labor intensity of the workers.
Advanced microwave, according to the requirements of the tea leaves at different stages dehydration rate to filming for the level with high efficiency.

Cooking palm oil refining machine/

Soybean Oil Processing Plant sunflower Oil Processing Plant full

1.What kind of crude vegetable oil can be refine?

Crude soybean oil, palm oil, palm kernel oil, sunflower oil, canola oil(rapeseed oil)
,peanut oil, sesame oil, conttonseeds oil etc.

Available Oil Raw Materials:

Hydration Deguming & Alkali Refining Deacidification

The crude oil is output by the oil feed pump from the oil tank, and next enters the crude
oil heat exchanger to recover part of heat after metering and then is heated to the required
temperature by the heater. After that, the oil is mixed with the metered phosphoric acid or citric acid
from phosphate tank in the gas mixture (M401), and then enters the conditioning tank (R401) to
make the non-hydratable phospholipids in oil change into the hydratable phospholipids.
Add the alkali for neutralization, and the alkali quantity and alkali solution concentration
depend on the quality of the crude oil. Through the heater, the neutralized oil is heated to the
temperature (90℃) suitable for centrifugal separation to remove the phospholipids, FFA and other impurities in the crude oil. Then the oil goes to the washing process.

Bleaching

In normal situation , there is pigment in the crude oil , we need to using the active clay
to absorb the pigment away , after 20 mins , we use the vibrating filter to filter the waste clay away .
If you want to get light color oil , you need to add more active clay . That is mean , the customer can
accord to his requirement to control the oil color. This process is carried out under the vacuum
condition.

3.Main refininf section:

(1) Degumming section: used to P-acid de-gumming, alkali refining de-acid and water rinsing.

(2) Decoloring section: used to remove off pigments, bleaching oils and grease dehydrate.

(3) Deodorizing section: to remove off the odor components in oil.

(4) Dewax: used to remove off the wax in the oil, in order to get the high quality oil.

(5) Heat-transfer oil stove: supply each device production needing heat energy, temperature
reach above 280C.

(6) Steam generator: produce the needing steam for de-odoring and distillation.

(7) Vacuum pump: supply needing vacuum for dehydrate, de-color, de-odor. Vacuum degree
can reach above 755mm Hg.

(8) Press filter: filter clay, filter out clear oil.

(9) Air compressor: blow dry bleached clay, blow empty the leftover oil in the press filter.

Our Strength:

1, Established in 1982, we have more than 30 years experience. Our goal is to be pioneer in
global and oil
industry.
2, We have deep cooperation with LD Machine Design Research Institute and LD
University of
Technology. Our professor often go abroad attending and oil conference and forum.
3, We have completed service line including technical department, engineering department,
project department, electronic commerce department, domestic trade department and foreign trade department.
After signing contract, we will set up special team including engineers, installation technicians, drawing
designer, business person, after-sales service person, and so on. We will provide one-to-one service.

Main Business Field:
1, 10-500T/H oil material primary cleaning,drying and storage section turn-key project.
2, 100-3000 T/D oil pretreatment, shelling and pre-press workshop turnkey project (soybean hot
dehulling, bean skin crushing, the soybean extrusion, high oil contained pre-pressed cake
extrusion and high oil contained flakes puffed directly). Rice bran turn-key project.
3, 100-3000 T/D leaching workshop turnkey project (towline extractor, rotocel extractor, loop
type extractor,
4, LD separated machine, the full negative pressure evaporation, Paraffin wax recovery, leaching workshop degumming, phospholipid concentration).
5, 30-1000T/D continuous physical (chemical) refining line.
6, 20-3000T/D sunflower oil, rice bran oil, corn germ oil dewaxing turnkey project.
7, 10-200T/D fatty acid esterification edible oil production line.

8, Some edible oil machine product line.

1. LD’e and oil machinery company is the manufacturer, the equipment is cost-effective.

I visit the LD’e factory many times before I buy their machine, they have a big factory, they can produce the pre-treatment equipment, solvent extraction equipment and refining equipment independently. Because they are manufacturer, the price is reasonable. I belive we will have a new cooperation in the near future.

2. LD’e and oil machinery company’s have good technology team and service team.

My factory has just completed construction. Their engineers have a wealth of experience in installation. They guide installation during installation time and very responsible. After we finish the installation, they were debugged. The quality of finished oil is very good. I think they are manufacturer.

Cooking palm oil refining machine/Soybean Oil Processing Plant sunflower Oil Processing Plant full are obtained from a variety of seeds, s and nuts. Most common types of oil-bearing seeds and nuts are Canola, Castor, Coconut, Corn (Maize), Cottonseed, Mustard, Olive, Palm, Palm-Kernel, Peanut (Groundnut), Rapeseed, Safflower, Soybean, and Sunflower. Cooking palm oil refining machine/Soybean Oil Processing Plant sunflower Oil Processing Plant full are obtained from Almond, Avocado, Cashew, Grapeseed, Jatropha, Pecan, Pine, Shea, and Walnut. There are literally hundreds of other seeds and nuts that are available regionally around the world.

AAA1
Cooking palm oil refining machine/Soybean Oil Processing Plant sunflower Oil Processing Plant full is necessary for oils & fats or animal oils & fats so they can be used for cooking and frying foods. Chemically speaking, oils are Tri-Glycerides or “Fatty-Acid Glycerin Esters” (FAGE). One Glycerin molecule combines with three Fatty-Acid molecules to form one FAGE. Oils are a blend of different types of FAGEs. The Oils can be differentiated on the basis of the length of carbon chain in the Fatty Acids and the number and location of double bonds in the carbon chains of the Fatty Acids. Greater the number of double bonds between two carbon atoms, the greater is the extent of “unsaturated” fatty-acids in the fatty-acid profile of the oils. “Unsaturated” oils and fats are considered more desirable than “saturated” oils and fats from health point of view.

AAA2
cooking palm oil refining machine/soybean oil processing plant sunflower oil processing plant full in the tresher can separate the fruit from the bunch. The fruit will be conveyed to the digester through elevator, and the empty bunch will be conveyed to the outside part through scraper conveyor. The Cooking palm oil refining machine/Soybean Oil Processing Plant sunflower Oil Processing Plant full adopts once forging technology, which can make the equipment more solider and durable. At the same time, shandong leader machinery co.,ltd.we have already designed the non spindle tresher, which is driven by the link chain. It can save the producing cost in a large scale.

AAA3

If you have any demand about microwave drying equipment and edible oil refining equipment, pls feel free contact us any time.

LD Miss Candy
Skype: leaderfoodmachine9
Mobile: +86 18363700691 (Also WhatsApp & Wechat)
Email: [email protected]