Multiple vegetable and tallow oil refining plant

Product Description:
According to customers on the type of oil, daily processing volume, oil standards and other conditions of the requirements of processing customization, size, refining the number of cans, product prices are different.
Can undertake:
1 tons-500 tons of Nissan soybean, rapeseed, peanut, sunflower and other pressing refining production line
1 tons-500 tons Nissan corn germ, pepper, walnut oil, rice bran oil and other pressing refining production line
1 tons-500 tons of Nissan tea seeds, walnuts, almonds, cottonseed, sesame and other pressing refining production line
Product Advantages: Through dephosphorization, decolorization, acid removal, deodorization and other processes,
can make the gross oil to achieve national Standard Oil quality standards, refined refined oil color clear, long time storage without mucus, not degenerate, no flavor.

Specifications

Tallow oil refining plant

We can manufacture three types crude oil refinery machines for 19 years.

A.Bacth type: It is very economic and efficient , it is suitable for oil refining small capacity crudeoil , such as 1-20 tons .

B.Semi-continuous: It is semilar with batch type refinery , but in the deodorization section is different . The semi-continuous refinery adpots deodorization tower to get ride of the odors , the effectiveness is more obvious. It is suitable for refining 30-60 tons crude palm oil .

C.Continuous: This type refinery line is suitable for refining the capacity above 80 tons.Indeed , our smallest continuous refinery machine is 30 tons .

These refinery machines can refine all kinds crude vegetable oil .

Here , our main purpose is introduce the batch-type tallow oil refining plant :

A.Preheating secticon:

Pumping crude oil into hydrate tank (oil refining tank), on one hand, quickly stirring , on the other hand, heating by

steam or heat-transfer oil (in coil pipe), rise oil temperature.

B.Degumming section:

This is the most important section of hydrate de-gumming, manage the adding water (there is a little P-acid in the

water) amount, temperature and add water speed, usually water adding amount is about 3 times of phospholipid

content, that is 3-10% oil weight, water temp needs to be higher than oil temp.

C.Deacidification section:

This part adopt alkali refining method, that is use alkalis like (NaOH) to neutral the free fatty acid in oil, during this process it will produce soapstock , then separated from the oil by setting several hours. NAOH solution, not only neutral free fatty acid, also can act with other matters like protein, mucus, phospholipid, pigment. After settling, release the soapstock from the tank bottom. Adding hot water to rinse, remove off the leftover lye , soap and some unhydrated phospholipid in the oil. Finally pumping out soapstock from the tank bottom.

D.Decolorization Section:

In normal situation , there is pigment in the crude oil , we need to using the active clay to absorbthe pigment away , after 20 mins , we use the vibrating filter to filter the waste clay away . If you want to get light color oil , you need toadd more active clay . That is mean , the customer can accord to his requirement to control the oil color. This process is carried out under the vacuum condition.

E.Deodorization and Dehydration Section:

Usually ,there are some odors in the crude oil , it affects the quality of the edible oil . About our refining process , we usually use the direct steam to take odors away in the vacuum condition . General speaking there is about 0.5% water in the alkali refined oil, in the deodorization pot , thetemperature is very high , it also can finish the dehydration section.

F. Filtering:

This process can remove off the small amount of unsettle gum soluble impurities in the degummed oil, after oil dehydrate cooling (60 °C), filtering again, to ensure the product oil quality. Th-en pumping the final oil into the oil tank.

G.Dewaxing section:

After refining , there is a final process is required , that is De-waxing .Because there is some wax content in the sunflower oil , you need to remove it , or it will affect the quality of the edible oil .

If you are interest in our products , please contact me . I will try my to solve the problems for you . Hope to have a chance to cooperate with you .

Our main production lines:

The pictures of our factory:

The pictures of our workshops:

The pictures of our crude oil refinery:

The pictures of deliverying goods to LDngdao Port:

At present, Multiple vegetable and tallow oil refining plant is the most advanced oil press equipment in oil extracting and processing machine. Small scale oil extraction machine is through forced feed by a screw shaft which produce high temperature and pressure under the rotation and squeeze between screw shaft and pressing ring. It is a extracting oil technique that make materials from crush and squeeze to oil and cake, which belongs to physical press.

AAA1
Introduction of Multiple vegetable and tallow oil refining plant
1)Palm oil mill have main ten parts: Reception Station,Sterilizer,Threshing,Press,Clarification, Kernel Recover, power station, boiler station, water treatment plant, oil storage tank.
2)Multiple vegetable and tallow oil refining plant use the Fresh Fruit Bunch, because the palm fruit rancidity is very fast, if the rancidity will be influence the palm crude oil acid value, if the acid value is very high, the refining efficiency will drop.
3)Generally speaking, the palm oil mill be mainly located in Nigeria,Malaysia,Indonesia etc..
AAA2

Pressing machine uses hydraulic control system to adjust
spacing between pressing bolts. So it can be suitable for various palm fruit species and guarantee the oil yield.

AAA3

If you have any demand about microwave drying equipment and edible oil refining equipment, pls feel free contact us any time.

LD Miss Candy
Skype: leaderfoodmachine9
Mobile: +86 18363700691 (Also WhatsApp & Wechat)
Email: [email protected]