Full automatic control 4m-30m length cca acq preservative pressure wood treatment equipment

Why do you choose the Shandong Leader Machinery Co.,ltd. Full Automatic control 4m-30m length cca acq preservative pressure wood treatment equipment?
1.Healthy! Pure mechanical squeezing craft maximally keeps the nutrients of the oil plants.No chemical substances left
2. High working efficiency! Due to a high working efficiency of the screw oil press machinery,both time and power can be saved.
3. Long durability! All the parts are made of the most suitable material and treated with refined crafts, such as cemented quenching and tempering to increase the hardness, consequently the durability.
4. Full automatic control 4m-30m length cca acq preservative pressure wood treatment equipmentCost-effective! Low investment! The wearing parts on the oil press machinery such as the squeeze loop, squeeze spiral and squeeze bar are designed to be dismountable. When they are out of service period, users only need to replace them and there is no need to displace the whole machine.

Full automatic control 4m-30m length cca acq preservative pressure wood treatment equipment

1. The usage of wood treatment equipment

• Wood pressure treatment equipment can be used for wood preservation, wood flame-resistant, wood coloring, mainly for timbers. The wood can be used for 15-50years, the wood can adapt to all kinds of environment.
• Wood pressure treatment equipment apply to be preservation, termite proof and to prevent fungal.

Parameter range:

1) Working pressure: -0.08MPa--3.6MPa

2) Working temperature: 0--200°c

3) Vocuum degree(relative): 0.098MPa

4) Capacity ( one time ): 2 / pot--20 /pot

5) Length: 6-50m

6) Diameter: 1-5m

3. The working principle of wood treatment equipment

Working processes:

• Inicial vacuum: suck air out of tank and wood with vacuum pump and keep the vacuum status 15minute to 1 hour according to treatment aims. Vacuum status is good for agent liquid goes into wood.The vacuum degree can be 0.098MPa.

• Agent liquid adding: under condition of vacuum pump agent liquid into tank.

• Pressurizing: when tank is full of agent liquid, pressurize tank with pressure pump. The pressure inside tank will rise slowly to rated pressure.Then keep the tank under rated pressure until wood have absorbed enough agent liquid.

• Pressure discharging: when wood have absorbed enough agent liquid,discharge inside pressure and agent liquid that have not been absorbed.

• Final vacuum: when the rest agent liquid has been discharged,suck air out of tank and wood with vacuum pump again to make redundant.Agent liquid exude from wood. cells or surface to avoild liquid drops.

4. 3D drawing of wood treatment equipment

5. Installation of wood treatmnet equipment

6. The delievry of wood treatment equipment

7. Productions in our workshop of wood treatment equipment

8. ABOUT LD &OILS MACHINERY CO.:

♦ More than 60 years manufacture histories.

♦ Largest oil machine manufacturer in China.

♦ 100,000 m² of factory total area and 580 senior engineering technicians.
♦ 23 National patents.
♦ 87 million yuan fixed assets.

♦ 150 million annual sales turnover.

9. LD COMPANY ADVANCED EQUIPMENTS:

10. LD CUSTOMERS VISITING OVER THE WORLD:

11. STATE LEADERS VISITING TO LD:

12. LD OVERSEA EXHIBITION:

If you want to know more information about our project, Please Leave Message on below form and click "send" below. I will reply to you. Thanks!

Introduction of Shandong Leader Machinery Co.,ltd. Full automatic control 4m-30m length cca acq preservative pressure wood treatment equipment
Solvent condensation system combines with evaporation system closely, and evaporative condenser and steam stripping condenser all work under negative pressure.
Non-condensable gas enters the energy saver from the shell of the first evaporator. In energy saver, noncondensable gas exchanges heat with condensate from the evaporative condenser.
Finally, the condensate temperature discharged from energy saver is increased, and the solvent separated water from going to the solvent holding tank.
AAA1

advantage of full automatic control 4m-30m length cca acq preservative pressure wood treatment equipment:
1) The material (for pretreatment) is sent to rotary extraction by the scraper conveyor. The material will extracted by the solvent or mix oil. After this step, we will get meal and mix oil.
2) Meal is send to toaster. Through the toaster, the solvent in the meal will separate from the meal. The solvent goes to condenser and is recycled to rotary extraction.
AAA2

3) After the mix oil from the rotary extraction enters into 1st evaporator and 2nd evaporator, most of the solvent in the mix oil is separated.
4)The mix oil from 2nd evaporator goes to stripping tower and almost all the solvent is separated. From the stripping tower, we can get crude oil and solvent. The solvent is sent to condenser and is recycled to rotary extraction.

AAA3

If you have any demand about microwave drying equipment and edible oil refining equipment, pls feel free contact us any time.

LD Miss Candy
Skype: leaderfoodmachine9
Mobile: +86 18363700691 (Also WhatsApp & Wechat)
Email: [email protected]